Learn to diagnose, not guess.
Free, hands-on practice for automotive technicians. Short enough for a break, built to work on your phone, and written so the answer always comes with the why.
Try one from the practice test
A lamp is off. With the switch commanded closed, both lamp terminals measure 12 V relative to battery negative. The filament and power feed are known good, and there are no other paths. Which fault best fits?
Start here
Practice test
Electrical theory and diagnosis at ASE test-prep level. Practice one topic at a time or take the whole thing.
Voltage drop lab
A dim headlight and a meter. Move the leads, read each section of the circuit, and find where the voltage is going.
Case files
You get the concern and some data. You pick the next test, and find out whether it was the right call.
Field notes
Fixes from years of shop notes on older Subarus, the kind of thing that never made it into a manual.
Every diagnosis, the same four steps
The case files and labs here all follow this order. It's how you stop throwing parts at a car.
Verify the concern
See it, hear it or measure it yourself before you touch anything.
Gather data
Codes, freeze frame, scan data and history. Know what the car is already telling you.
Pick the next test
The quickest test that proves or rules out the most. Not the part you'd guess.
Fix and verify
Repair it, prove the concern is gone, then write up the concern, cause and correction.
Why lambda one
In a gasoline engine, lambda 1 is the chemically correct air-fuel mixture, roughly 14.7 parts air to 1 part fuel for straight gasoline. It's the target a closed-loop fuel system keeps steering back to.
That's the idea here. Measure, compare against known-good, and steer back to the right answer instead of guessing.
Who it's for
- Apprentices and new techs who can replace parts but can't chase a fault yet
- Working techs moving into electrical and drivability work
- Service writers who need to explain why diagnosis takes time
- Shop owners and leads training a whole team
What's here and what's coming
Ready now
- Electrical fundamentalsPractice test and voltage drop lab
- Case filesThe first four
- Field notesThe first six
Next
- Meter masterySetup, min/max, amp clamps, testing under load
- Scope schoolCaptures, waveforms and a known-good library
- Scan data and fuel trimsReading what the car is already giving you
- Drivability strategyConcern, data, test plan, verify
- Shop communicationConcern, cause, correction, and explaining diag time
Later
- Networks (CAN)How modules talk, and finding the one that stopped
- Boxer enginesFlat-four quirks, common failures, smart inspections
- Tuning fundamentalsAdvanced. Data logs first.
- Certificates
Who's behind it
Lambda One is built by Dan, who manages a Subaru service shop and has always wanted to teach. It starts with Subaru and other Asian makes, with domestic work mixed in.
Everything here is free right now. If you find a mistake, email dan@lambdaone.tech and it gets fixed. Same address if you want your shop involved.